Peavey PC1600X Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 66

background image

38

Peavey PC1600X User Manual (rev-h)

If the button is programmed to transmit a single note on message using the button “Note On” function (vs. a
MIDI string) the screen would be displayed similar to this:

BTN16: Chnl Note Vel
01 C4 Rem

As mentioned earlier the “Rem” designation indicates that velocity will be determined from remote MIDI
input, if a button is pressed locally (on the PC1600x itself) or a Program Change is received, the “rv” byte
value (or “Rem” setting) will be determined by the position of the fader above the button, even if it did not
follow a “9x” or an “8x”. The fader position number will always be ranged from 0-127 (or 1-127 if within a
note streams. It will not be affected by the fader's Min and Max parameters.

NOTE:

Since the “rv” velocity will use the fader position when the button is pressed on the PC1600x it is useful to
use “rv” even when not using the remote feature. It gives you a method of inserting the fader position (0-127
only) into any button string. Use it for program number, note number etc. If the fader is not being used for
something else, however it is probably better to program the message into the fader, then set the button to
“Send Fader”.

LEARN MODE

If a system exclusive message is received while a button string is being edited (the cursor must be visible).
the PC1600x wilt automatically replace the existing button string with the system exclusive message
received. Note recording is also possible with this function. See below for more information.

NOTE STREAM RECORDING

To make chord programming easier, the PC1600x can now record note streams into button strings. This
allows you to play a chord into the PC1600x to program a button instead of inserting all of the numbers in
manually. To set up note recording, you must first enable the feature by telling the PC1600x which MIDI
channel you will be sending the note data over. This parameter/screen is located in the Utility menu (alone
with the MIDI Device Numbers):

MIDI; DevNum RecChn
000 000

After setting the channel, go to any button's string editing screen (String, Prs/Rls or toggle) and hit the left or
right arrow button to put the underline cursor on the screen:

BTN01: String
90 3C 7F

The recording will be triggered by any Note On received on the specified channel. Any Note Off received on
that channel will erase the string, allowing you to experiment until you find the right group of notes. Any
other MIDI commands will not affect the recording. When finished, press the “ENTER” button while
continuing to hold the chord. (if you're using 2-handed chords you can plug a footswitch into the PC16000x
and set it to emulate the “ENTER” button - see the 6th screen under UTILITY.)

«
...
36
37
38
39
40
...
»

Содержание PC1600X



































































Отзывы:

Нет отзывов

Похожие инструкции для PC1600X

Бренд: Sagola Страницы: 8

Бренд: e+p Elektrik Handels Страницы: 2

Бренд: J.P. SELECTA Страницы: 32

Бренд: B&G Страницы: 16

IQAN-LC5-C0 Series

Бренд: Parker Страницы: 40

SOLID PLUS HEAT

Бренд: Rotaid Страницы: 20

Бренд: Stamina Страницы: 1

Бренд: E2S Страницы: 4

Бренд: Halemeier Страницы: 2

Бренд: IRUDEK Страницы: 19

Бренд: hager Страницы: 2

Бренд: Nexus Страницы: 79

Бренд: Teletek electronics Страницы: 2

Ratio:Feeder J Plus Series

Бренд: H.E. Anderson Страницы: 9

Бренд: P.A. Страницы: 17

RoadRunners Laser

Бренд: Baracoda Страницы: 25

Бренд: ADJ Страницы: 6

Бренд: Ikan Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды