Peavey MediaMatrix MM-8802 Скачать руководство пользователя | Manualshive

Страница: 7 / 51

background image

Welcome

Page 7

Peavey Electronics Corporation

Thank You!

Thank you for purchasing the MM

™

-8802 Break-out-Box or "BoB" for

MediaMatrix

®

digital audio processing systems. The MM-8802 represents

the latest in state-of-the-art audio technology for fixed commercial audio
installations.

This manual was written to provide as much information as possible for
your new Peavey Architectural Acoustics product. It is our sincere desire
that you enjoy your purchase.

We feel that the best way to fully enjoy any purchase is to have an in-depth
understanding of the product’s features, functionality and performance char-
acteristics.  We hope that this manual, along with the manuals of our other
products, will provide this.  If you require additional information that this
manual does not provide, please let us know.  We are always looking for bet-
ter ways to provide information about our products, and your input is
always appreciated.

If you have a comment about this manual, or would like to make a sugges-
tion, please write to: Peavey Electronics Corp., Architectural Acoustics
Division, 711 A St., Meridian, MS 39301. Thank you again for using Peavey!

What’s In The Box?

The MM-8802 is packaged in a single container. This container includes the
following items:

1- MM-8802 Break-out-Box
1- IEC removable power supply line cord

(120VAC Domestic, 230VAC Export)

17- 3-screw Euro connectors*
2- 16-screw Euro connectors*
1- User Manual/Literature Package
1- Warranty Card

* These items are shipped installed on the MM-8802

If any of these items are missing, please contact your authorized Peavey
Architectural Acoustics contractor/dealer or the factory.

Products

This manual covers the MM-8802 Break-out Box for MediaMatrix brand
products. The MM-8802 replaces the following products:

MM-8830 Break-out-Box
MM-8840 Break-out-Box
MM-8848 Break-out-Box

The functionality provided by these legacy products is provided in the new
MM-8802, as well as many additional features and improved performance.
The MM-8802 is designed to be seamlessly integrated with these products
and all MediaMatrix brand products.

«
...
5
6
7
8
9
...
»

Содержание MediaMatrix MM-8802




















































Отзывы:

Нет отзывов

Похожие инструкции для MediaMatrix MM-8802

Бренд: Raritan Страницы: 4

Бренд: Yamaha Страницы: 6

Бренд: Yamaha Страницы: 4

Бренд: Yamaha Страницы: 22

Бренд: Yamaha Страницы: 49

Бренд: Samsung Страницы: 65

Бренд: IEI Technology Страницы: 3

EK-FC1080 GTX Ti TF6

Бренд: ekwb Страницы: 2

Бренд: Genie Страницы: 15

Бренд: axing Страницы: 4

Бренд: Kontron Страницы: 62

Бренд: PairGain Страницы: 80

iMarc SLV 9820-2M

Бренд: Paradyne Страницы: 24

Бренд: Quadram Страницы: 21

Бренд: Cypress Semiconductor Страницы: 26

Бренд: Lanner Страницы: 99

Бренд: El.Mo Страницы: 16

OPTIMA II CNPS10X

Бренд: ZALMAN Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды