Panel Features
Page 21
Peavey Electronics Corp
CAB 16d Rear Panel Features (shown without the Euro connectors attached)
1
2
3
4
5
6
7
8
IEC POWER CABLE RECEPTACLE
The included removable IEC power cable connects
here. Use only the supplied cable.
POWER SWITCH
Applies mains AC power to the CAB
™
16.
LINK OUT CONNECTOR
BNC connector to transmit link data to other CAB units or third
party synchronization products.
LINK IN CONNECTOR
BNC connector that receives link data from other CAB units or
third party synchronization products.
COBRANET NETWORK I/O
RJ-45 connector provides interface to the CobraNet
™
audio
network. This connection is required to pass audio with the CAB 16.
RS-485 PORT
Two two-wire, half-duplex RS-485 connections on removable Euro connec-
tors. Each connector is internally wired together for convenient busing of adjacent units.
AUDIO INPUT CONNECTORS
Balanced, three-wire digital (AES3) audio input connec-
tions on removable Euro connectors. This illustration shows the connector header only. The
unit is shipped with matching black pluggable connectors for each header bay.
AUDIO OUTPUT CONNECTORS
Balanced, three-wire digital (AES3) audio output con-
nections on removable Euro connectors. Each digital channel carries two audio channels. This
illustration shows the connector header only. The unit is shipped with matching black plug-
gable connectors for each audio channel.
1.
2.
3.
4.
5.
6.
7.
8.