Pearl VX5WV, Руководство владельца/оператора

Страница: 6 / 16

– 6 –
vi. ASSEMBLY and SET-UP
1. Open the carton box.
2. Remove the rip guide and dust guard cover.
3. Remove the carton partition and remove the
remaining components. Recycle packaging but
retain the manual.
4. Remove the blade shaft bolt and outer flange.
Install the provided blade and reinstall the
outer flange and blade shaft bolt.
5. Using the provided closed box wrench and I-
socket wrench, tighten and blade shaft nut.
6. If cutting wet, install the blade guard hoses
onto the blade guard. Install the garden hose
assembly onto blade guard hose assembly
valve if necessary.
7. Install side handle onto blade guard.
1. Using the provided close box wrench and t-
socket wrench (turning clockwise), loosen the
blade shaft nut. Remove the outer flange.
2. Install the blade and reinstall the outer flange
and blade shaft bolt (see fig. 2).
3. Screw in the side handle if removed (see fig. 4).
Figure 1
v. UNPACKING
Open the carton box cover by lifting the top portion.
Locate the accessory box and check its content for the
following items before discarding any packaging:
1 Saw
2 Side handle
3 T-Socket wrench
4 Closed box wrench
5 Rip guide
6 Owner's manual
7 Dust guard cover
8 Garden hose assembly
9 Blade guard hose assembly (partially
installed on power cable)
10 Manual
11 Blade (sold separately)
BLADE INSTALLATION
WARNING: Disconnect the power plug before
installing the blade onto the blade shaft.
Figure 2