Pearl VX5WV, Руководство владельца/оператора

Страница: 13 / 16

– 13 –
DO’S
• Inspect blades daily for cracks or uneven wear.
• Always use appropriate blade for material being cut.
• Inspect arbor shaft for uneven wear before mounting
blade.
• Always use blades with the correct arbor shaft size.
• Ensure that blade is mounted in the correct direction.
• Use proper safety equipment when operating the
saw.
• Always have a continuous flow of water on both
sides of blade.
• Secure the blade to the arbor with a wrench.
DONT’S
• Do not cut dry with blades marked “Use Wet”.
• Do not exceed manufacturer’s recommended
maximum RPM.
• Do not force blade into material. Let blade cut at its
own speed.
DO’S
• In addition to the following, always follow wet
recommendations.
• Use appropriate blade for material being cut.
• Inspect segment blades for segment cracking or
loss.
• Do not use damaged blades.
• Use proper safety equipment when operating the
saw.
DONT’S
• In addition to the following, always follow wet
recommendations.
• Do not make long cuts with dry blades. Allow them
to air cool.
• Do not use the edge or side of blade to cut or grind.
• Do not attempt to cut a radius or curve without a
contour blade.
• Do not cut too deep or too fast into the material.
• Do not cut any material not recommended by blade
manufacturer.
WET CUT BLADES DRY CUT BLADES
xi. PROPER BLADE USE