Pearl PA1FS, Руководство владельца и оператора

Страница: 11 / 24

11
(D)
Lay Floor Scraper back on
handles
PA1FS FLOOR SCRAPER GENERAL OPERATION
Do not operate machine around excessive moisture areas, such as abatement work and flooded pool
areas without GFCI wall plug. Failure to do so could cause damage in machine or injury to operator.
WARNING
Adjusting the wheel angle will change the blade angle to the floor. Adjustments may be required for
your particular application. Experiment with the angle to see what works the best.
WHEEL ADJUSTMENT
Adjustment by trial at the beginning of a job will allow optimum performance. See Blade
Setting page 14.
(A)
A steep wheel angle is
recommended on hard
removals such as vinyl, VCT
and carpet over concrete or
wood
(E)
Rotate the angle adjust-
ment wheel to the desired
blade angle
(B)
A low wheel angle is recom-
mended for ceramic tile and
hardwood removal over all
floors
(C)
Turn bolt and remove
nose weight
NOTE: