- 13 -
- 14 -
WIRING AND MOUNTING CRASH/RIDE CYMBALS
1. Locate the Ride and Crash Cymbal and their matching
cables and insert the cables into the corresponding
jacks. Note: The Ride Cymbal has two Jacks. Make
sure to insert the cables into the correct Jacks
(Fig. 22-A).
2. Attach the Cymbal to the Cymbal Mount and attach the
Felt Washer and Wing Nut in the order shown (Fig. 22).
Make sure that the logo on the Cymbal is facing away
from you to get maximum response from the cymbal.
WIRING AND MOUNTING BRASS HI-HAT CYMBAL
1. Unscrew the Wing Nut on the Hi-Hat Holder and
remove the Felt and Metal Washers and the
Attachment.
2. Place the Bottom Plastic Cymbal on the Support
Washer as shown. and reattach the Attachment in the
order shown (Fig. 24).
3. Pass the Hi-hat Cable through the hole in the Bottom
Plastic Cymbal as shown (Fig. 24) and plug it into the
Jack under the Brass Hi-hat Cymbal as shown (Fig.
24-A).
4. Assemble the Brass Hi-hat Cymbal, Felt Washer, Metal
Washer, and Wing Nut in the order shown (Fig. 24).
5. Tighten the Wing Nut to your preference.
WIRING AND MOUNTING RUBBER HI-HAT CYMBAL
1. Unscrew the Wing Nut on the Hi-Hat Holder and
remove the Felt and Metal Washers
2. Arrange the Attachment and Support Washer in the
order shown (Fig. 23).
3. Set the Rubber Hi-hat Cymbal on the Support Washer
and Attachment as shown. Note: Make sure that they fit
securely in the recess under the Rubber Hi-hat
Cymbal. Face the logo on the Hi-hat Cymbal away from
you to get maximum response from the cymbal.
4. Reattach the Felt and Metal Washers and the Wing Nut
in the order shown (Fig. 23) and tighten the Wing Nut
to your preference.
5. Connect the Hi-hat cable into the Hi-hat Cymbal Jack.
Fig.22-A
Fig.24-A
Fig.23
Fig.22
Fig.24
Wing Nut
Wing Nut
Support Washer
Attachment
Jack Box Cable
Cymbal Post
Metal Washer
Felt Washer
Wing Nut
Metal Washer
Felt Washer
Attachment
Support Washer
Cymbal Post
Felt Washer
Jack Box
Note
*The angle of the Hi-Hat Holder can be adjusted with the
gear tilter to your preference.
Note
*The angle of the Hi-Hat Holder can be adjusted with the
gear tilter to your preference.
sample
