– 6 –
vi. INSTALLATION AND OPERATION
1. Rotate the blade bolt access door down.
See Figure 1.
2. Remove the blade shaft bolt, washer and
outer flange.
3. Place the blade onto the blade shaft. The
bore of the blade should sit fully on a
shoulder located on the inner flange. Make
sure that the directional arrow on the blade
is aligned with the rotation of the shaft.
4. Reinstall the outer flange, washer and
blade shaft bolt in this order. Tighten the
bolt using the provided wrenches
The cutting table comes preinstalled on the
machine. To remove the cutting table perform the
following steps:
1. Make sure the table lock is not engaged.
See Figure 2.
2. Loosen the bolts as shown on right so the
brackets they secure can slide down.
3. With both brackets down, lift the table
from the rails starting from the left side.
4. Perform the steps in reverse to remount
the table.
Figure 2
Figure 1
v. UNPACKING
Open the container. Carefully lift the saw out evenly by the frame. Be certain you have the following
items before you discard the container:
• Saw • Size 19 Open Wrench
• 14" saw blade • 45º/90º rip guide
• Universal wrench • Owner’s manual
BLADE INSTALLATION
CUTTING TABLE ASSEMBLY
