– 19 –
xvi. WATER HOSE KIT INSTALLATION
1. Orient the w
ater pipes as shown in Fig. A. Insert the shortest pipe from the "Y"
adapter into the adjacent sleeve at the rear of the blade guard. First, you will need to
remove the black cap covering the hole insert (#1). The longest pipe, which has a
control valve midway, should be pointed towards the floor.
2. Insert the second pipe protruding from the top of the "Y" adapter into the slot located
on the side of the blade guard towards the front of the saw. This is the hole in the
front of the blade guard (#2), do not remove the black caps on the side. See Fig. B.
#1
#2
Black caps
(do not remove)
Some force will be required to
pinch the mouth of the pipe
when inserting it into the slot.
Fig. A
Fig. B
The clamp included is only used on VX141MS -- not VX141MSPRO (RENTAL)
