4.2. Set the Output Voltage/Current
You can set the output voltage/current through input box. About the rated range of each mode, please refer to "3.4.1.
Icons and Ratings
”.
Note:
The output voltage/current cannot be set in Timer status. If you want to set it, you should exit the Timer status first.
Normal - Mode
(1) Press the orange Volt/CV or Curr/CC key, the input box of Channel 1 output voltage/current will pop up.
(2) The key light will start blinking, indicating to input, there are two methods to change the value.
Modify
: Turn the knob or press the
▲ / ▼ direction key to change the value by the unit of cursor position,
hold down the
▲ / ▼ direction key to change continuously. Press the
＜
/
＞
key to move the cursor.
Input
: Use the numeric keys to enter a desired value, the original value will be cleared, and display the value
you entered.
(3) Press the
key to confirm.
In the same way, press the blue Volt/CV or Curr/CC key to set the output voltage/current of Channel 2.
Parallel/Series Mode
(1) Press the orange Volt/CV or Curr/CC key, the input box of output voltage/current will pop up.
(2) The operation of input box is the same as Independent mode.
Plus-minus Mode
(1) Press the orange Volt/CV or Curr/CC key, the input box of Negative output voltage/current will pop up.
(2) The operation of input box is the same as Independent mode.
In the same way, press the blue Volt/CV or Curr/CC key to set the Positive output voltage/current.
Note:
If the input value is out of the rated range, the box prompts "ERROR"; you need to input another value within the rated
range. In Series mode, the minimum rating of the current is 0.1A; in other modes 0.02A.
-43-
