PeakTech 3415 USB DMM, Руководство по эксплуатации

Страница: 33 / 56

1.1. Safety Symbols
The following symbols are imprinted on the front panel of the meter to
remind you of measurement limitations and safety.
10 A
The maximum current, that you can measure a this
terminal is 10 A DC/AC. This terminal is fuse
protected by F 10 A/1000 V fuse. When using this
range with high current, keep the duty cycle to 4 min.
on load and 14 min. off load.
mA The max. current, that you can measure with this
terminal is 600 mA, that is fuse protected by 0,63 mA /
1000 V fuse.
max.
To avoid electrical shock or instrument damage, do
not connect the C Common Input COM terminal to
any source of 1000 V DC/AC with respect to earth
ground.
The max. voltage this meter can measure is 1000 V
AC/DC
Be exceptionally careful when measuring high
voltages. Do not touch the terminals or test lead ends.
Refer to the complete operating instructions!
Indicates protection class II, double insulation
CAT III / IV Overvoltage category III / IV
AC
DC
AC and DC
Grounding
-32-