PeakTech 3335, Руководство по эксплуатации

Страница: 38 / 124

(8) °C/°F-Button
The °C/°F button is used for the switchover between °C and
°F in the temperature measurement.
(9) Backlight
The backlight helps to read measuring values from the
display at unfavourable lighting conditions.
(10) ON/OFF-button
To switch on or off the unit.
5. Preparation for Operation
5.1. Using the test leads
Use only the identical type of test leads supplied with your
meter. These test leads are rated for 1200 V.
Cautions!
* Although the replacement probes are rated for 1200 V,
the maximum rating of your meter is 1000 V DC and 700
V AC. If you try to measure DC voltages above 1000 V or
AC voltages 700 Vrms, you might damage your meter
and expose yourself to a serious shock hazard. Use
extreme care when you measure high voltages.
*
Never connect the probe you plug into the COM terminal
to a source of voltage greater than 1000 V DC/700 V
ACrms with respect to earth/ground. This creates a
serious shock hazard.
5.2. Using the stand
Use your meter’s stand to prop up the meter. If you prop your
meter on a bench-top, the stand helps provide a better
viewing angle.
To use the stand as a prop, just open it away from the meter
and set it on a flat surface.
-37-