1. Safety Precautions
This product complies with the requirements of the following European
Community Directives: 2004/108/EC (Electromagnetic Compatibility) and
2006/95/EC (Low Voltage) as amended by 2004/22/EC (CE-Marking).
Overvoltage category III 600V; pollution degree 2.
CAT I:
For signal level, telecommunication, electronic with small
transient over voltage
CAT II:
For local level, appliances, main wall outlets, portable
equipment
CAT III: Supplied from a cable under earth; fixed installed switches,
automatic cut-off or main plugs
CAT IV: Units and installations, which are supplied overhead lines,
which are stand in a risk of persuade of a lightning, i.e. main-
switches on current input, overvoltage-diverter, current use
counter.
WARNING! Do not use this instrument for high-energy industrial
installation measurement.
To ensure safe operation of the equipment and eliminate the danger of
serious injury due to short-circuits (arcing), the following safety
precautions must be observed.
Damages resulting from failure to observe these safety precautions are
exempt from any legal claims whatever.
*
Do not exceed the maximum permissible input ratings (danger of
serious injury and/or destruction of the equipment).
*
The meter is designed to withstand the stated max voltages. If it is
not possible to exclude without that impulses, transients, disturbance
or for other reasons, these voltages are exceeded a suitable presale
(10:1) must be used.
*
Do not operate the meter before the cabinet has been closed and
screwed safely as terminal can carry voltage.
*
Replace a defective fuse only with a fuse of the original rating. Never
short-circuit fuse or fuse holding.
-26-
