5.8. Frequency measurement
1. Set the function switch to the "Hz" position.
2. Insert the black test lead into the negative COM jack and the red test
lead into the positive Hz jack.
3. Touch the test probe tips to the circuit under test.
4. Read the frequency in the display. The digital reading will indicate
the proper decimal point, symbols (Hz, kHz, MHz) and value.
5.9. Capacitance measurements
Warning:
To avoid electric shock, disconnect power to the unit under test and
discharge all capacitors before taking any capacitance measurements.
Remove the batteries and unplug the line cords.
1. Set the function switch to the "CAP" position.
2. Insert the black test lead into the negative COM jack and the red test
lead into the positive V/
/CAP-jack.
3. Touch the test leads to the capacitor to be tested. The display will
indicate the proper decimal point, value and symbol.
-43-
