PeakTech 1200, Руководство по эксплуатации

Страница: 68 / 73

Appendix A: Technical Specifications
Unless otherwise specified, the technical specifications applied are applicable to the
probe with the attenuation switch setting 10X .
Only if the oscilloscope fulfill the f llowing two conditions at first, can these o
specification standards be reached.
„ This instrument should run for mo than 30 minutes continuously under the re
specified operating temperature.
„ If the change range of the operating temperature is up to or exceeds 5 ć , open the
system function menu and execute the "Auto-calibration" procedure.
All specific tion standards can be fulfilled, except one(s) marked with the word a
"Typical".
Sampling
ACQU Mode Sample
Peak Detection
Average
250 MS/s
Sampling Rate
Input
Input Coupling
Input Impedance DC,AC
1M
Ω ± 2%, connected with 20pF± 3pF in parallel
Probe attenuation coefficient 1X, 10X, 100X, 1000X
Max. Input Voltage 300V, Peak Value
Level
Sampling Rate Range
Waveform interpolation
Record Length
Scanning Speed Range
(S/div )
10S/s
~
250MS/s
(sinx) /x
6000 sampling points per channel
5ns/div ~ 5s/div, according to the stepping mode of
1- 2- 5.
Measuring Accuracy of Time Single: ± (One Sampling Interval Time +100ppm ×
Interval (
∆ T) (DC ~ 50M)
R0.6ns)
>Averages of 16: ± (One Sampling Interval Time
+100ppm× R0.4ns)
- 67 -