PeakTech 1200, Руководство по эксплуатации

Страница: 47 / 73

Save and Recall the Wave Form
The PeakTech
®
oscilloscope can store four wave forms, which can be displayed with
the current wave form at the same time. The stored wave form called out can not be
adjusted.
In order to save the wave form of the channel CH1 into the address A, the operation
steps should be followed:
1. Press the
F1
menu selection button and choose CH1 for Source.
2. Press the
F2
menu selection button and choose A for Wave.
3. Press the
F3
menu selection button and save the wave form.
4. Press the
F4
menu selection button and choose
ON
for CHA. The stored wave
form A will be displayed in the screen. The voltage level and time base level will
also be shown at the upper left corner of the display area at the same time (see
Fig. 43).
Fig. 43
Wave Saving
- 46 -