3
5)
VCF
input
* VCF accuracy: 1%
* Input voltage
±
5 V DC, maximum sweep occurs at 5 V DC
* VCF input impedance: approx. 1 k
Ω
6)
TTL
output: To 20 TTL/CMOS DRIVES
* Level(TTL): Fixed amplitude, < 0.4 V: for a low “L”, and g> than 2.4 V: for a
high “H”
7)
FUNC
output
* Level (TTL): Variable Amplitude (Max. 10 V
pp
, Impedance 50
Ω
)
4. Accessories
This unit is shipped with the following accessories:
1) Manual ··························································································1 copy
2) BNC cable ·······················································································1 unit
3) Line Cord·························································································1 unit
4) Spare fuse (T2AL/250V) ·································································1 unit
5) RS232 Cable (9Pin to 9Pin) ····························································1 unit
6) RS232 Program ··············································································1 unit
7) GP-IB port ·······················································································1 unit
Note:
The accessories may be changed to improve the product quality without notifying the customers.
Optional accessories will be made available at a later date.
IEC 1010 Over Voltage:
CAT
Ⅱ
-1000V
Pollution Degree 2
WARNING: Use only correct size, voltage, and current rated fuses.
Test leads: Inspect the test leads for damaged insulation or exposed metal.
Check test lead continuity. Damaged leads should be replaced.
Chapter 2. Installation of the equipment
This chapter supplies all the necessary information to install this equipment. It includes: initial inspection,
preparation for use, appropriate voltage selection, packing for the return, etc.
1. Initial inspection
1) When received, inspect the shipping box for damage. If the shipping carton is damaged verify that
there is no mechanical damage to the instrument and it is functional. Verify that all accessories are
present.
2) Save the shipping carton and packing material until the unit is verified functional and within
specification.
3) If the unit is not functional or accessories are missing, report all problems to the vendor where the
unit was purchased as soon as possible to arrange for repair or replacement.
