PEAKnx Controlpro PNX11-20001, Руководство пользователя

Страница: 6 / 28

6
1 Target audience
1 Target audience
These instructions are intended to explain basic aspects of the installation, commissioning, ope-
ration and maintenance of the Controlpro. Depending on the use phase, this manual is aimed at
other target groups:
▪ Commissioning
▪
Installation and commissioning may only be carried out by qualified electricians and system
integrators. Basic knowledge of electrical and KNX installation is assumed.
▪ Operation
The operation of the commissioned panel is explained for unskilled users.
▪
Repair
▪ Under no circumstances carry out repairs to the unit yourself! If damage should occur to the
device, please contact our technical support immediately,
see chapter 9.3.
2 Intended use
Depending on the software used, the Controlpro serves as control unit for the entire KNX instal-
lation across rooms. It thus also serves as a status display. The device must be operated within
the scope of the technical data and instructions given in this manual. Keep the device away
from moisture, dirt and dust to prevent damage to the device.
The following applications belong to the intended use:
▪ Use as an operating panel (input via touch) for KNX-controlled devices
▪
Intercom station for compatible door stations
− A list of all compatible door stations can be found in our FAQ:
www.peaknx.com/FAQ under the topic “compatibility”.
▪ Indoor operation, note the ambient conditions, see chapter 10
The following applications are not part of the intended use:
▪
Operation in systems requiring special monitoring, in safety-relevant areas or in hazardous
areas
▪
Operation under ambient conditions that do not comply with the specifications regarding
temperature and air humidity. These include
− Outdoor operation
− Operation under direct sunlight
− Operation in environments with high dust and dirt exposure
− Operation in environments with high vibration exposure
▪
Operation in a moving environment (e.g. mobile homes)
▪ Operation in vessels