Peak PCAN-USB Pro, Руководство пользователя

Страница: 27 / 44

PCAN-USB Pro – User Manual
27
Figure 17: Selection of the LIN specific hardware and parameters
22. From the Hardware list, select the LIN channel to be used.
23. From the dropdown list Mode , select the operation mode
Master or Slave to be used for the LIN channel.
24. Select the bit rate that is used by all nodes on the LIN bus
from the dropdown list
Bit rate .
25. If you do not know the bit rate for the connected LIN bus,
you can automatically detect the used bit rate with the
function
Bit rate detection . In the field Timeout you can set
the time, to wait for a response from the hardware until the
timeout occurs. Confirm with
Detect
.
Note: The LIN channel where the Bit rate detection is to be
executed must not be initialized (no connection to a software).
If a bit rate was determined successfully, it automatically
appears in the dropdown list
Bit rate .
26. Finally confirm the settings in the dialog box with OK . The
main window of PLIN-View Pro appears (see Figure 18).