PCAN-PC/104 – User Manual
26
5.
Enter the port address and the interrupt (see section 2).
6.
Confirm your input with
OK
.
7.
From the drop-down list, select the
Bit rate
that is used by
all nodes on the CAN bus.
Tip:
You can create custom bit rates by using the button (
).
8.
Under
Filter settings
you can limit the range of CAN IDs to
be received, either for standard frames (11-bit IDs) or for
extended frames (29-bit IDs).
9.
Activate the
Listen-only mode
if you do not actively
participate in the CAN traffic and just want to observe. This
also avoids an unintended disruption of an unknown CAN
environment (e.g. due to different bit rates).
10.
Confirm the settings in the dialog box with
OK
. The main
window of PCAN-View appears (see Figure 14).