PCAN-PC/104 – User Manual
13
Node:
The
CAN device drivers Non-Plug-and-Play
is only
available under 32-bit Windows. PCAN-PC104 does not work
under 64-bit Windows.
6.
Follow the further instructions.
2.3
Installing the Hardware
Do the following to install card into the PC/104 stack:
Attention!
Electrostatic discharge (ESD) can damage or destroy
components on the card. Take precautions to avoid ESD.
1.
Shut down the computer.
2.
Disconnect the computer from the power supply.
3.
Plug the PCAN-PC/104 card onto a PC/104 connector.
4.
Interconnect the connector for each CAN channel on the
PCAN-PC/104 card (see Figure 4) with the CAN connector of
the slot bracket using the attached flat cable.
5.
Reconnect the power supply of the computer.
Note:
Before switching on the computer, please follow the pro-
cedure for modifying the computer's BIOS settings described in
the following section.
