PEAKnx NET-TV
Operating Instructions
www.peaknx.com
www.peaknx.com
56
57
5.4.10 Update
In the menu item
Update
, you can
easily update
your PEAKnx
NET-TV to the
latest firmware
version�
To use these functionality, the PEAKnx NET-TV must have an active Internet connec-
tion� By clicking the
Check
button, an available firmware update on the server from
PEAKnx will be searched and provided�
After you clicked the button
Update
, the download will be performed, following the
PEAKnx NET-TV will restarted� This usually requires about 2 to 3 minutes� Please
check for an update if you can enable additional functionality of PEAKnx NET-TV�
It is at any time possible to restore the previous firmware version� Proceed as follows:
■
Turn off PEAKnx NET-TV
■
Press and hold reset button and turn on PEAKnx NET-TV
■
Release the reset button after more than 5 seconds
■
PEAKnx NET-TV restarts automatically and is after about 1 minute reachable again
5.5 Access via client
The PEAKnx NET-TV can communicate with SAT>IP compliant clients (hardware
and software), UPnP DMS Clients and browser-extensions� A latest overview of
official SAT> IP clients can be found at www�satip�info�
Note:
Some SAT> IP Clients are chargeable to purchase.
Image 19: Update
Warning note!
During the update of the PEAKnx NET-TV no clients can be used� The connection
to any active clients in the mode live-TV or recording will be interrupted�
5.5.1 Access via App
Install on your smart phone,
tablet or desktop PC a
SAT>IP compliant client�
After the configuration of the
client you can on an opera-
ting system of their choice
(e�g� Android, iOS, Windows)
access to the PEAKnx
NET-TV�
Example of a configuration on iOS / Android for the SAT> IP app from Elgato:
Buy the SAT>IP App of the manufacturer Elgato from the iTunes Store or Google
Play� The app is a pure SAT>IP Client for use with SAT>IP servers from different
manufacturers� It simulates a conventional
Living room Receiver
on your mobile
device� The features like are Live-TV, channel scaning, EPG and Timeshift are
available�
Note:
The Elgato SAT>IP app currently supports only the types of reception DVB-S / S2 / T / T2.
Install on your tablet / smart-
phone, the latest version of
the
Elgato SAT>IP
app� When
you launch first time the app
it will automatically detects
the PEAKnx NET-TV� After a
channel scan (menu item:
Settings - Search stations
)
are all found unencrypted SD
channels in the app usable�
Image 20: Image source > Elgato�com
Image 21: Image source > Elgato�com
