PEAKnx NET-TV
Operating Instructions
www.peaknx.com
www.peaknx.com
44
45
The output of the twintuner card (IEC connector) can be used to supply additional
devices (eg TV or PEAKnx products) if the PEAKnx NET-TV is in operation� The built-in
amplifier ensures that a signal is passed on without any loss in quality
5.2.2 4-tuner version of the PEAKnx NET-TV:
The first twin tuner pair should be connected as described in the two-tuner version�
Supply the second twin tuner couple with either a separate signal input, for example if
you want to use the first twin tuner for DVB-C and the second twin tuner for DVB-T/T2�
Or you can use a short antenna cable (optional equipment) to connect the output
(IEC connector) of the first twin tuner to the input (IEC connector) of the second twin
tuner, if the reception type on both twin tuner pairs is the same�
Finally, connect the PEAKnx NET-TV to the grid via the supplied mains adapter�
Use only professionally installed main sockets 220-240V(AC) / 50-60Hz�
5.3 Commissioning
Turn the PEAKnx NET-TV on using the power switch on the front side�
The device then automatically hooks up to the network and receives a free IP
address from the DHCP pool of the DHCP server (which typically is a component
of routers)� LED 1 on the front side indicates the operating state:
The PEAKnx NET-TV is now
ready for use in its original
configuration�
To turn off the PEAKnx
NET-TV, hold the On/Off -
switch at least
10 seconds
pressed�
5.4 Configuration Menu
The following instructions, for configurating the PEAKnx NET-TV, are based on firm-
ware 1�29 (Q3/2014)� A current version of the manual is available on our website
www�peaknx�com�
The configuration of the PEAKnx NET-TV is done via a web interface� The PEAKnx
NET-TV logs into the network with the name
PEAKnx NET-TV
� Accessing the
configuration interface can be done in the following ways:
Condition
Description
Off
PEAKnx NET-TV is not in operation mode
Flashing
PEAKnx NET-TV is booting up
on
PEAKnx NET-TV is ready for operation
5.4.1 Access in Windows 7/8
Open
computer
on the desktop and
then select
network
� The PEAKnx
NET-TV appears as
PEAKnx NET-TV
�
Double-click on the device and the
configuration interface opens�
5.4.1.1 Access in Windows XP
Please click
My Computer
on the desk-
top and then select
My Network Places
�
The PEAKnx NET-TV appears as
PEAKnx NET-TV
� Double-click on the device and the
configuration interface opens�
The configuration interface is also accessible through a browser by entering the IP
address�
If you do not know the IP address of the device, please proceed as follows: With the
right mouse button click on the PEAKnx NET-TV under Network or My Network Places
and select the menu item
Display device web page
�
Your standard web
browser on a PC will then
return the configuration
web page� The current IP
address of the device is
displayed in the address
bar of your browser�
5.4.2 Status Information
To get the information of the firmware version of your PEAKnx NET-TV, please call
up the configuration interface� More information about your device can be found by
selecting the menu item
Home
�
Image 6: PEAKnx NET-TV - Network
Image 7: Exemplary IP address
