PCAN-PCI Express FD – User Manual
30
4.1.5
Error Generator Tab
Figure 17: Error Generator tab
Via the
Error Generator
tab, the communication on the CAN bus can
be disturbed for testing purposes by 6 consecutive dominant bits.
This is a violation of the CAN protocol on the CAN bus which must
be recognized as an error by the connected CAN nodes.
You can destroy CAN frames with the error generator by one of two
methods:
once after activation
repeatedly at specific intervals related to a CAN ID
The
Destroy Single Frame
area refers to the next CAN frame that is
recognized by the plug-in card after activation.
Do the following to destroy a single CAN frame:
1.
Enter the
Bit Position
where in the CAN frame the error is to
be generated. The count includes the stuff bits.
