PCAN-PCI Express FD – User Manual
23
Do the following to start and initialize PCAN-View:
1.
Open the Windows Start menu and select
PCAN-View
.
The
Connect
dialog box appears.
Figure 11: Selection of the hardware and parameters
2.
Select an interface from the list.
3.
From the drop-down menu, choose a
Clock Frequency
. The
selectable bit rates in the following are based on this
setting.
4.
From the drop-down list, select a
Nominal Bit rate
, which is
used for the arbitration phase (max. 1Mbit/s).
5.
Enable the
Data Bit Rate
checkbox.
6.
From the drop-down menu, choose an additional
Data Bit rate
for the CAN FD bus. The bit rate selected here
is used to transfer the data fields of a CAN FD frame with a
higher bit rate.
Note:
Both transmission rates must match those which are
used by all nodes on the CAN bus.
