P.14
P.13
K) FOOTREST
• The legrests are removable and swing-away
• Foot plates are adjustable in angle
• Knee cushion pads are provided
• Pivot footplates and legrests are adjustable
INSTALL :
• Pivot footplates and legrests upwards to vertical position
• Turn the swing away footrest assembly to the side
• Install the hinge plates on the footrest onto the hinge pins on the wheelchair frame
• Push the footrest assembly inwards until it locks into place
ADJUSTMENT:
HEIGHT OF LEGREST :
Unscrew the small knob located on the side of legrest and
adjust to the desired height
ANGLE :
• Flip up and down the foot plate until the desired position
is reached
WARNING :
• DO NOT stand on the footplates
• Always make sure that the footplates are in the vertical position when getting
in or out of the wheelchair
• Always ensure the footrest is locked in position before use
Lever
REMOVE :
• Pivot footplates and legrests upwards to vertical position
• Pull up on the footrest release lever to unlock the footrest
• Rotate swing away footrest assembly outwards
• Lift the footrest assembly off the hinge pins
I) WHEEL LOCK :
The wheel locks allow a safe transfer of the user.
OPERATION:
Engage the lock: Push lock handle backwards. The wheels are locked and the wheel-
chair does not move. (FIGURE A)
The wheelchair is equiped with a device for passing kerbs.
Operation : Unlock security (B) and push pedal (A).
J) PASSING KERBS :
Figure A
NOTE :
• Wheel locks are not brakes and are not to be used to slow the wheelchair.
• Check that bolts are tight.
• Ensure that the manual brake does not touch the wheel when moving.
A
B
NOTE :
Always pay extra caution when using on wet, soft ground or on gravel surfaces
Always ensure that the locking pin fully protrudes out of the hole on the side of
the wheelchair frame prior to use
