P.10
P.9
D) BACKREST:
• Removable and reclinable by actuator
• A padded seat cushion is provided
• The cloth protection is made of Dartex and has been
tested fire-resistant to ensure maximum safety
• Adjustable in height
ADJUSTMENT:
•
HEIGHT:
Unscrew the 4 small knobs behind the
backrest by turning anti-clockwise, and adjust to the
desired height.
•
ANGLE OF BACKREST:
Squeeze the left-handed han-
dle upwards while pushing the backrest down to the
desired position.
•
ANGLE OF CHAIR:
Squeeze the right-handed handle
upwards while pushing the whole chair down to the
desired position.
•
DISMANTLE THE BACKREST:
Remove the pin, then
the washers and screws
E) SEAT:
• A padded cushion is provided
• The cloth protection is made of Dartex and has been
tested fire-resistant to ensure maximum safety
Small knob
Recline the backrest
Recline the chair
NOTE :
Ensure that the seat is fully open and seat rails are fully
seated into the side frame before sitting or transferring
into the wheelchair
C) ARMREST :
• Removable
• Adjustable in height and depth
• Side panels with cloth protection
• The cloth protection of side panel is made
of Dartex and has been tested fire-resistant
to ensure maximum safety
ADJUSTMENTS:
HEIGHT OF ARM PAD:
Press the button located on the side of the
armrest, adjust to the desired height of the
arm pad.
DEPTH OF ARM PAD:
Unscrew the small knob underneath the arm
pad by turning anti-clockwise, and adjust it to
the desired position.
REMOVE THE ARMREST:
Press the button located on the side of the arm-
rest, and lift it upwards for removal
WARNING :
DO NOT lift the wheel-
chair by the armrests. Wheelchair should
be lifted by the frame.
Button
Small knob