User define Mode U1 Setting
This mode is supported only MIDI program change (same as mode F1 – F8) but you can set total BANK limit
and you can also set the program change number start.
You can set the FCB4N to U1 mode by step following:
1.
Make sure you are already enabled the programming mode.
(Please see Programming Mode
Enable chapter)
2.
Press
P1
switch and hold until the
BANK/PROGRAM
display is flashing a current preset mode.
(Please see Preset Mode Selection chapter)
3.
After you have selected
U1
mode and
BANK/PROGRAM
display is flashing
“U1”
then press
P2
switch to enter
U1
mode and setting parameter as below:
4.
Select MIDI channel that you want to transmit messages once the
BANK/PROGRAM
display is
showing
“CH”
for 1 second then it will show you the current MIDI channel. You can select from
01 – 16
for setting a MIDI channel.
5.
If you have selected a MIDI channel then press
P2
switch to scroll up the setting menu.
6.
The
BANK/PROGRAM
display is showing
“SP”
for 1 second then it will show you the current
start MIDI program change number. You can select from
00 – 2.7
for setting the start program
change number. (If number is over 99 then it will show in a point)
7.
If you have selected MIDI PC# start then press
P2
switch again to scroll up the setting menu.
8.
The
BANK/PROGRAM
display is showing
“tb”
for 1 second then it will show you the current
total bank. You can select bank# from
1 – 32
for setting how many banks do you want.
9.
After you’ve completed setting then press
P4
switch to save the setting into a memory. The
FCB4N will goes out from the preset mode setting and return back to the operation mode with
programming mode enabled.
10.
If you want to return back to the preset mode selection page again please press
P2
switch.
11.
You can cancel and exit setting by press
P3
switch. The FCB4N will goes out from the preset
mode setting without saving any changes and return back to the operation mode with still in
programming mode enabled.
Note:
You can press
P1
switch to see the current setting topic/menu.
P2 for enter selected or scroll up
BANK UP / DOWN for select setting
Mode U1
MIDI Channel#
Start PC#
Total Bank