Preset Mode Selection
The FCB4N has 10 presets mode so you can select each preset mode to matching with your MIDI devices.
You can select a preset mode by step following:
1.
Make sure you are already enabled the programming mode.
(Please see Programming Mode
Enable chapter)
2.
Press
P1
switch and hold until the
BANK/PROGRAM
display is flashing a current preset mode.
The default setting is mode
F1
so, the
BANK/PROGRAM
display should be flashing as
characters below:
3.
Once the
BANK/PROGRAM
display is flashing current mode then release the
P1
switch.
4.
You can select preset mode which you want by scroll to/past via
BANK DOWN
or
BANK UP
switches. The
BANK/PROGRAM
display is flashing as characters below:
5.
After you’ve selected a preset mode then press
P2
switch to confirm.
6.
If you have selected Factory Default Mode (F1 – F8) the next step is going to a MIDI channel
selection. Otherwise please see the next chapter.
7.
The
BANK/PROGRAM
display will be showing characters
“CH”
for 1 second and will be
flashing a current MIDI channel. (Default MIDI channel is
1
) So, the
BANK/PROGRAM
display
is flashing as characters below:
8.
You can select a MIDI channel from 1 – 16 by scrolling to/past via
BANK DOWN
or
BANK UP
switches. The
BANK/PROGRAM
display is flashing as characters below:
9.
After you’ve selected a MIDI channel then press
P4
switch to save the setting into a memory.
The FCB4N will goes out from the preset mode setting and back to the operation mode with
programming mode enabled.
10.
If you want to back to the preset mode selection page (main menu) please press
P2
switch.
11.
You can cancel or exit setting by press
P3
switch. The FCB4N will goes out from the preset
mode setting and return back to the operation mode with programming mode enabled.
Note:
You can press
P1
switch to see the current setting topic/menu.
BANK UP
BANK DOWN