Atlas IT
User Guide
July 2013 – Rev 7
Page 20
Appendix C – Error/Warning Messages
The
Atlas IT
cannot detect the terminator. It
is possible that the cable has too many
broken connections or the terminator itself is
damaged.
It is not possible to display a full connection
pattern if only 2 wires are connected
between the
Atlas IT
and the Terminator.
This will be displayed if the cable being
analysed is not similar to any of the types
stored in the
Atlas IT
. The connection
pattern will still be displayed however.
The unit is designed for testing non-live
network cables, if excessive voltages are
detected or an internal fault has occurred
then this message may be displayed.
This may be displayed if
Atlas IT
has been
connected to a live network connection
rather than an
Atlas IT
Terminator.
Содержание Atlas IT
Страница 11: ...Atlas IT User Guide July 2013 Rev 7 Page 10 This page is intentionally blank...
Страница 12: ...Atlas IT User Guide July 2013 Rev 7 Page 11...
Страница 13: ...Atlas IT User Guide July 2013 Rev 7 Page 12...
Страница 14: ...Atlas IT User Guide July 2013 Rev 7 Page 13 This page is intentionally blank...
