Atlas IT
User Guide
July 2013 – Rev 7
Page 9
Analysis Results
Good Cables
If the cable being tested is good, the
Atlas IT
will display a message similar to
this:
The first page to be displayed tells you the
type of connection configuration for the
cable you’re testing, in this case a simple 8-
wire patch cable (straight-through).
The arrow on the bottom-right of the display reminds you that more
information is available on the next page, briefly press
scroll-off
when you’re
ready.
The next information to be displayed is the confirmation of the full connection
pattern between the terminator “
Term
” and the
Atlas IT
“
Atlas
”:
As can be seen from the display here, the
connections are verified as being those
relating to a normal straight through patch
cable. The connections between the
Atlas
IT
Terminator end of the cable are shown
together
with
the
corresponding
connections on the
Atlas IT
end of the network cable.
The displayed cable type and connection
pattern depends on the type of cable being
analysed of course, as a further example
the following would be displayed for a
good 8-wire crossover cable:
Содержание Atlas IT
Страница 11: ...Atlas IT User Guide July 2013 Rev 7 Page 10 This page is intentionally blank...
Страница 12: ...Atlas IT User Guide July 2013 Rev 7 Page 11...
Страница 13: ...Atlas IT User Guide July 2013 Rev 7 Page 12...
Страница 14: ...Atlas IT User Guide July 2013 Rev 7 Page 13 This page is intentionally blank...
