16
fit
™
reformer owner’s manual
Using the Long/Short Box
Use the Long/Short box by following the directions below.
To use as a Long box:
Installing the Jump Board
To install the Jump Board perform the following:
1
2
Place the headrest in the flat position and foot bar and foot bar support bar in the storage position.
Place the box lengthwise on the carriage cushion, butting one end against the shoulder pads.
1
2
To use as a Short box:
Place the headrest in the flat position and foot bar and foot bar support bar in the storage position.
Place the box on the carriage cushion with one of the long sides resting against the cushioned
surface of the shoulder pads.
VERIFY THAT THE FOOT BAR SUPPORT BAR IS FULLY ENGAGED IN ITS
STORAGE SLOT BEFORE ATTEMPTING TO LIFT A MACHINE.
1
2
3
Stacking the fit
™
reformer
The fit
TM
reformer is unique in its design and can be easily stacked without the removal of any parts.
Place the gear bar and gear block in position 3.
Make sure at least the center spring remains hooked to the gear bar.
Place the foot bar and bar support bar in the storage position making sure that the support bar is
full engaged.
OPERATION
Lower the Footbar and Support Bar.
Slide the Jump Board pegs into the holes located on the Standing Platform with
the padded end facing the carriage.
1
2
!
WARNING
PeakPilates Fit Owners Manual-2021.indd 16
PeakPilates Fit Owners Manual-2021.indd 16
8/9/21 9:42 AM
8/9/21 9:42 AM
