18
fit
™
reformer owner’s manual
5
Roll the machine to its desired storage location.
VERIFY THAT THE FLOOR IS FLAT AND THAT THERE ARE NO OBSTRUCTIONS IN THE DESIRED
STORAGE AREA.
!
WARNING
THE LOCATION FOR VERTICAL STORAGE SHOULD BE CAREFULLY SELECTED—THE MACHINE
SHOULD NOT BE PLACED IN AN AREA WHERE IT COULD BE KNOCKED OVER. PLACING THE UNIT
ON A CARPETED OR SOFT FLOORING AS WELL AS TOUCHING OR BUMPING INTO THE UNIT IN
ANY WAY COULD CAUSE IT TO FALL.
6
Carefully lift the head end of the machine from the cross member. Continue lifting by “walking” your
hands along the left and right side rails until the storage bumpers located on the foot end cross
member contact the flooring surface. The unit should rest at approximately 10 degrees short of
completely vertical when properly stored.
Maintaining the fit
™
reformer
You have purchased a high-quality piece of equipment that is constructed of the finest components and materials.
Proper care requires only a small, but very important investment of time in a regular, routine maintenance program.
Part
Daily
Weekly
Bi-Monthly
Annually
As Needed
Inspect:
Overall Machine
Springs
Tracking System
Hardware
Foot Bar Support
Bar Hardware
Clean:
Frame
Upholstery
Tracking System
Replace:
Springs
Ropes
Double Loops
Safety Clips
Refer to the next page for details.
OPERATION
!
!
WARNING
PeakPilates Fit Owners Manual-2021.indd 18
PeakPilates Fit Owners Manual-2021.indd 18
8/9/21 9:42 AM
8/9/21 9:42 AM
