PCAN-USB – User Manual
17
If you haven't installed PCAN-View together with the device
driver, you can start the program directly from the supplied
CD. In the navigation program (
Intro.exe
) go to
English
>
Tools
, and under
PCAN-View for Windows
select the link
Start
.
The dialog box for selecting the CAN hardware and for
setting the CAN parameters appears.
Figure 6: Selection of the CAN specific hardware and parameters
2.
From the list
Available CAN hardware
select the CAN
channel to be used.
3.
Select the bit rate that is used by all nodes on the CAN bus
from the dropdown list
Bit rate
.
4.
Under
Filter settings
you can limit the range of CAN IDs to
be received, either for standard frames (11-bit IDs) or for
extended frames (29-bit IDs).
5.
Finally confirm the settings in the dialog box with
OK
. The
main window of PCAN-View appears (see Figure 7).
