background image

INTRODUCTION

Thank you for choosing nova! The nova project began as a simple idea with 

high expectations: design an integrated amplifier platform that connects 

to every popular Hi-Fi source, plays every type of file put into it, drives any 

speaker, fills any room, looks great doing it, doesn’t cost a small fortune 

and, most importantly, sounds better than anything in its price range. No 

easy task, but our team accepted the challenge and set out on a mission 

to completely re-imagine nova from the ground up. The team poured their 

heart and soul into every detail, no stone was left unturned and we hope 

you enjoy using nova as much as we enjoyed creating it!

The  nova  is  several  audio  components  in  one.  It’s  a  Digital-to-Analog 

Converter (DAC), preamplifier, phono preamplifier, headphone amplifier 

and power amplifier all wrapped in an attractive and simple to use 

package. Each function has been specifically designed to provide the 

ultimate listening enjoyment, regardless of the source or the listening 

method. Each individual function provides a listening experience that 

compares favorably with dedicated audio components that only perform a 

single function but cost more than nova. 

The DAC inside nova is a reference 32-bit/384kHz design that is capable 

of accepting all of the major file formats currently available today up 

to  and  including  32-bit/384kHz  PCM  and  5.6MHz  DSD.  This  includes 

compressed audio, uncompressed audio, high-resolution audio and ultra-

high resolution audio. The nova accepts them all! Built around the DAC 

is an extensive, multi-point, regulated power supply that keeps the DAC 

operating optimally and faithful to the input signal, providing the most 

natural sounding and musical DAC section we have ever designed! The 

nova500 takes the DAC design a step further and utilizes 4 DACs per 

channel (8 DACs total) to provide an even lower noise floor and greater 

musicality.

The preamplifier in nova is a full analog design with extremely flexible 

input and configuration capability. It accepts input from a computer, 

digital audio devices, analog audio devices, mobile devices and even has 

a built-in phono preamplifier for connecting a turntable. The two analog 

inputs are user-switchable so they can be configured 4 different ways: 2 

standard analog inputs, 1 Home Theater Bypass (HTB) input + 1 analog 

input, 1 analog input + 1 phono input, or 1 HTB input + 1 phono input. 

Your system, your choice! The digital inputs include a user selectable 

feature called volume control bypass that allows you to control overall 

system volume right from your connected source device – essentially 

bypassing the preamplifier in the nova to make it work like a stand-alone 

power amplifier. This is especially useful if you enjoy using an application 

on your computer or mobile device to select your music AND to control 

the volume. And last, but not least, there is a loop feature that allows an

7

Содержание nova 150

























Отзывы: