44
Push ZERO key to save Data Logger Data save time.
Select Data save time and push ENTER key to save then go to Data save page.
Figure 9. Data storage address set up
Long push ZERO key to select start page when Data Logger function data save. It can choose page
1 to page 30. Choose and select Data save page then push ENTER key to save.
To set rest of Menu function, push PEAK/MENU key again to set other various functions. Data
Logger function can save 100 sample data per page.
Data saved value are average and max.
Push ENTER key for 2 seconds to stop Data Logger function.
Available to check the data via RS232 Communication.
psi
%
g
0
psi
%
g
0
psi
%
g
0
Push PEAK/MENU key a few times to select End Menu or push POWER key to select End Menu.
After Menu sets then use Logger function, push ENTER key to 2 seconds then display shows “Log”
with blinking.
At this moment, unable to use RS232 Communication because PDR1000 is saving pressure value
at the same time.
psi
%
g
0
psi
%
g
0
psi
%
g
0
psi
%
g
0
psi
%
g
0
psi
%
g
0
