WaveStar Color Monitor_____________________________________________________________
Ctrl Nr: PM375103 Revision: 003
20
•
Touch
SEND TEST TRAP
to verify operation.
•
Get Community
security string for Get operations.
•
Set Community
security string for Set operations.
Touch
RESTART WITH NEW SETTINGS
if any parameter is changed on this screen. The processor
will reboot and search the network for connections.
3.2.5
Loading INI Parameters from an SD Card
Touching
Load INI
loads configuration parameters from an SD card inserted into the Monitor. This
function makes it easy to initialize a set of Monitors using common parameters. It is intended for
manufacturing and service use.
3.3
Software Versions
The
SOFTWARE VERSIONS
list (Figure 15) lists information about software levels for the Monitor
and its device chain and a customer-specified model number for the unit in which the Monitor is
installed, such as a PDU or RPP. The list has no configuration use: it does not have parameters that
determine Monitor operation.
•
MODEL number
: Touch
MODEL
and enter model number with the pop-up keyboard.
On
HOME
screen, touch the
SOFTWARE
VERSIONS
button to display a scrollable list of
versions levels for the Monitor and devices in its
device chain.
Device version numbers
are customer-specifiable
IDs, intended as device software version numbers.
Specify these in the
VERSION
field of
DEVICES
DEVICE
SETTINGS
screen.
(See
Chapter 3, Device Chain: Settings
.)
Color Monitor (Display) software
VERSION
number, from onboard
software
MODEL
is intended as a customer-
specifiable ID identifying the unit in which
the Monitor is installed, such as “PDU 182”.
Touch
MODEL
to enter the model number:
A keyboard appears requesting the
pa
ssword (Enter “VNUP”).
If password is accepted, a second
keyboard appears asking you to enter the
model number.
Figure 15 Model Information
