PDI-P26, 32, 40 TV Installation Guide
Page 44 of 52
Communication Systems Inc.
Better Solutions Are Within Reach™
INSTALLATION and OPERATING INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664
Document Number: PD196I127R1.DOC
Install DVD module
1. Remove the Side Panel
by pressing on the two
plastic tabs.
2. Connect the cable to
the DVD module.
Tighten with the thumb
screws on both sides of
the cable.
3. Slide the DVD module
into one of the three
positions.
Sideways Bottom
Top
4. Connect the other end
of the cable to one of the
connectors on the side of
the TV. Tighten with the
thumb screws on both
sides of the cable.
Note
:
If you are going to mount the DVD in the top position it is easier to connect the cable to the bottom
connector on the TV. If you mount it in the sideways or bottom positions, the top connector is better.
5. Line up the screw hole
on the module with the
corresponding screw hole
in one of the three
positions.
6. Secure the module
with the screw that came
with it.
screw
screw
