Communication
Systems Inc.
PDI-P23LCDD Quick Start Guide
Page 6 of 8
Better Solutions Are Within Reach™
INSTALLATION INSTRUCTIONS
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH +1-937-743-6010 PH +1-937-743-5664
Document Number: PD196I148R1.DOC
PROGRAMMING
NOTE:
A programming remote control is required to perform all setup operations for the television. The programming
remote (Part Number: PD108-420) is NOT packaged with the TV and must be ordered separately. The following
instructions assume you have a programming remote, have correctly mounted the TV, wired an external pillow speaker,
and connected an RF coax cable signal.
Channel Setup
The TV offers three different programmable channel banks or Service Levels to program. Only one Service Level is
usable at a time.
Four different tuning types are available depending upon the healthcare facilities’ signal style.
Selection of the correct signal type is required for the TV to recognize all possible channels and before any channel
programming can begin.
1.
Press the SETUP button to display the SETUP MODE menu.
2. Press
the
CH
Ÿ
/ CH
ź
button to select Signal.
3. Press
VOL
Ż
/ VOL
Ź
to select Air, Cable STD, Cable IRC or Cable HRC. NOTE: Most hospitals use the Cable
STD signal style.
Auto Program
The TV automatically scans each available channel for activity. Channels that display activity are memorized into the
selected Service Level.
1.
Press the SETUP button to display the SETUP MODE menu.
2. Press
the
CH
Ÿ
/ CH
ź
button to select Mode.
3. Press
VOL
Ż
/ VOL
Ź
to set the scope of channel scanning.
Analog Only: TV searches for analog channels only.
Digital Only: TV searched for digital channels only.
Analog and Digital: TV searches for both analog and digital channels.
4. Press
the
CH
Ÿ
/ CH
ź
button to select the Channel Sequence menu item.
5.
Press VOL
Ż
/ VOL
Ź
to set the Channel Sequence in which the channels are displayed after searching.
Interleave A+D: In the order of channel number regardless of the system.
All A then D: Digital channels are displayed after all analog channels.
6.
Press the CH
Ÿ
/ CH
ź
button to select the Service Level you wish to program. The menu displays the current
programming status of each level as either Programmed or Blank. NOTE: A Programmed service level can also be re-
programmed if desired.
7.
Press the VOL
Ź
button to start auto programming.
8.
A confirmation menu will appear before proceeding. Press either the CH
Ÿ
to start auto programming. Press CH
ź
button to cancel the operation. The TV will now search all available channels. Press the SETUP button to return to
normal TV viewing.
