Your Source for Healthcare and
Wellness Infotainment
™
MODEL:
PDI-P19A
Document Number:
PD196-328R2
LCD Monitor with Android Quick Start Guide
Page 6 of 15
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
ARM MOUNTING
This monitor is designed to attach to a wall mounted suspension arm adjusted to support a monitor weighing
twelve pounds (For example: PDI-AA412-XY Series).
The single coaxial cable on top of the Monitor is used to supply low voltage AC or DC power (28VAC or 24VDC)
and the RF signal to the monitor.
Note:
Contact PDi for additional information on arm compatibility and cable requirements.
DANGER: ARM RECOIL HAZARD
The safety brake pin must remain in the SAFETY BRAKE PIN HOLE whenever the monitor is
removed from the arm or when the arm is removed from the wall bracket to prevent the arm from
springing open.
1. Slide the Monitor assembly onto the nose of the arm as shown in Fig. 1.
2. Secure PDISHCS252075 bolt with a 5/32” Allen wrench and make coax cable connections as shown in
Fig. 2
MAC ID LABEL
The MAC ID label will be located on the back cover of the unit next to the Android operating instructions label.
This will be specific to the unit.
WIFI ID LABEL (If Applicable)
The WIFI ID label will be located on the back cover of the unit next to the MAC ID label. This will be specific to the
unit.
Fig. 1
Fig. 2
MAC ID
WIFI ID
