Your Source for Healthcare and
Wellness Infotainment
™
MODEL:
PDI-P19A
Document Number:
PD196-328R2
LCD Monitor with Android Quick Start Guide
Page 13 of 15
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Slide to the ftp server tab.
You will see your network status and an icon labeled
Start Service
Touch
Start Service
to start the ftp server on this
device.
If you see the icon label
No Wi-Fi-Network
please
check your network connection.
Note:
The ftp server will work only on a Wi-Fi
connection.
Note:
The ftp server will have to be manually re-
started when the device reboots.
Touch the back arrow to go back to the cloning
application screen.
The
Confirm and save slave config file
takes you to
the Slave configuration setup.
Make sure the entries are in Green. This means the
host is reachable and the file is available.
You may also use this information for manual slave
set-up.
Congratulations, your master clone setup is complete!
Step 4: Summary
Touch
All Done
to exit the cloning application
