Better Solutions Are Within Reach
®
MODEL NUMBER:
PDI-772HE-IND
Document Number:
PD196-181R3
Individual Input Port Central Power Supply
Page 6 of 12
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Wall Installation
1.
The central power supply is
designed to mount on a wall in
an upright position with the
power cord pointing down.
The supply should be
positioned near an AC wall
outlet. This unit is convection
cooled and requires clearance
at the top, bottom, and sides of
the enclosure - see
Guidelines
for details.
2.
Position the supply
maintaining clearance. Mark
the four mounting hole
locations.
3.
Drill and install four, 1/4-20
toggle bolts (not supplied) at
each of the mounting hole
locations. Expose 1/2 inch of
thread on each bolt.
4.
Center the supply over the
1/4-20 bolts. Tighten.
