Better Solutions Are Within Reach
®
MODEL NUMBER:
PDI-772HE-IND
Document Number:
PD196-181R3
Individual Input Port Central Power Supply
Page 3 of 12
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Unplug this supply from the wall outlet before
cleaning. Do not use harsh chemicals such as
solvents. Use a damp cloth for cleaning. Do
not immerse this power supply in water.
7.
Do not block any ventilation openings. Install in
accordance
with
the
manufacturer
’
s
instructions.
8.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9.
This power supply incorporates a three-wire
grounding-type plug, a plug having a third
grounding pin. This plug will only fit into a
grounding type power outlet. This is a safety
feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purposes of the grounding type plug.
10.
Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11.
Only use attachments/accessories specified by
the manufacturer.
12.
This power supply is
intended for permanent
installation.
It is not
intended
for
mobile
operation. Do not use this
product with a cart.
13.
Unplug
this apparatus
during lightning storms or
when unused for long periods
of time.
14.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
15.
This appliance should be mounted to a wall only.
Do not mount this supply to or in a ceiling.
16.
Care should be taken so that objects do no fall
and liquids are not spilled into the enclosure
through openings.
17.
If an outside antenna or cable system is
connected to the video product, be sure the
antenna or cable system is grounded so as to
provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA 70,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See
Figure A.
NOTE: This reminder is provided to call the CATV
system installer
’
s attention to article 820-40 of the
NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of the
building, as close to the point of cable entry as
practical.
18. This supply does not require periodic
maintenance other than cleaning.
