Document Number: PD196-244R8
PD295-002
Page 12 of 28
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Central Style PDI-772HE-IND Power Supply - RF Cable Installation
Low voltage AC TV power is present on each central power supply TV RF out port. Each RF In port is designed to be
connected to a separate RF source with minimal loss and high isolation.
1. Remove power from the TV at the central power supply.
2. Connect a coaxial cable from the Set Top Box
“OUT TO TV” to one of the 10 “RF IN” ports on the PDI-772HE-IND.
3. Connect the coaxial cable from the
TV to “RF OUT”. The TV coax should be limited to 150’ to accommodate the
central power supply coax length limitations.
4. Connect an Optional Secondary RF signal coaxial cable to the Set Top
Box “OFF-AIR IN”. This connection is only
necessary if you wish to view TV signals that are already present on your system in addition to Set Top Box signals.
Signal strength entering the Set Top Box should be +3dBmV to +10dBmV.
