Below is the view of the individual zone set up page. On this
control this zone.
Step 1:
Pick the type of heater you are setting up (TIP / M.F) "TIP" is for
manifold.
It is important to select the correct heater type, so the control runs the soft start and au
correctly
Step 2:
We recommend you select a zone for each zone to Slave to, if you lose your TC on this
heater zone for example if zone 1
another nozzle zone. The system will
running.
TC50 Hot Runner Temperature Controller
-4
-
Below is the view of the individual zone set up page. On this page, you will set up all the options to
Pick the type of heater you are setting up (TIP / M.F) "TIP" is for
It is important to select the correct heater type, so the control runs the soft start and au
We recommend you select a zone for each zone to Slave to, if you lose your TC on this
heater zone for example if zone 1 - 8 are nozzle zones you will want all of these zones to slave off
another nozzle zone. The system will automatically look for this zone if
Hot Runner Temperature Controller
you will set up all the options to
Pick the type of heater you are setting up (TIP / M.F) "TIP" is for nozzle / "M.F" is for
It is important to select the correct heater type, so the control runs the soft start and auto tuning
We recommend you select a zone for each zone to Slave to, if you lose your TC on this
8 are nozzle zones you will want all of these zones to slave off
e if the TC fails and will keep
