Pco dicam C1, Руководство пользователя

Страница: 52 / 64

52
A3.3 CHANGE FROM F-MOUNT TO C-MOUNT
How to change the optical input from F-mount to C-mount:
MECHANICAL DAMAGE OF THE C-MOUNT RING
Tightening the hexagon socket setscrews too tight will permanently
damage the C-mount ring.

Use a torque wrench and select a maximum torque of 1 Nm
to tighten the hexagon socket setscrews.
Step 1: Remove F-mount adapter
Turn the black lock ring counterclockwise to loosen the F-mount
adapter and then unscrew it.
Step 2: Insert C-mount ring
Carefully screw the C-mount ring clockwise so that the two
hexagon setscrews are visible on the outside.
Step 3: Adjust flange focal distance
In order to reach the standard support dimension of C-Mount (17.526
mm), screw the C-mount ring so far that it protrudes by about
3.3 mm .
For fine adjustment use a suitable lens with large aperture.
Step 4: Fix the C-mount ring
To fix the C-mount ring, tighten both hexagon setscrews (1.5 mm
hex key) to a maximum torque of 1 Nm.
NOTICE
1
1
2
2
3
3
4
4
2