Pco dicam C1, Руководство пользователя

Страница: 27 / 64

27
8 CAMWARE SOFTWARE
5
1
2
3
4
8.5 HARDWARE I/O CONTROL PCO.DICAM C4
Change settings using the drop-down menu.
For electrical specification, see chapter
A2.4
Channel Trigger / Master Trigger
Select if you want to trigger the camera by Master Trigger
or individual
Channel Trigger
. If checked on, a signal for
External Exposure Start
is accepted at the BNC input or at
the optical input, see 7.1 .
Select I/O Signal :
Channel Trigger; Master Trigger
Channel Electrical / Optical: On; Off
Arm
If checked on, an
Arm
signal triggers the
Double Image
mode.
An exposure trigger signal is accepted after
≥
9.5 ms (full resolution)
Arm signal.
Arm:
On; Off
Gate
Allows to turn off the photocathode during a configured exposure
time period.
Gate: On, Off
Exposure Out
If checked on, a signal indicating photocathode exposure status is
provided at the exposure out output.
For technical reasons, with exposure times of 4 ns and 10 ns, the
length of the output signal is increased tenfold to 40 ns / 100 ns, from
20 ns the time is displayed correctly.
Exposure Out: On; Off
Busy Global Out
If checked on, a signal at the monitor output indicating exposure or
readout status is provided at the exposure out output. During Busy
active, no external trigger signal is accepted.
Select I/O Signal: Busy Global Out, MCP Status Out,
Expos Window A
Busy / MCP / Expos: On; Off
1
2
4
3
5