8.
Out
9. Default
a. Measurement
- No Contents
b. Velocity Rate
b-1. Setting velocity
- Press
key into“ Setting velocity ”state
- Press
or
to change velocity rate
- Press
to enter/confirm
b-2. Velocity measurement
- Measuring the sample which thickness is known
- Press
key into“ Velocity measurement ”state
- Press
or
to up and down the value of velocity to determine the thickness as the same as the value
of sample that is measured
- Press
key again, the gauge will store the velocity rate automatically.
c. Probe Setting
The gauge provides three types of probe for user.
- Press
key into “Probe selecting” state
- Press
or
to select probe.
1= normal probe (PT-08)
2= small diameter probe (PT-06)
3= low frequency probe (ZT-12)
4= High Temperature probe (GT-13)
- Press
key to enter/confirm
d. Resolution
- Press
key into “Resolution” state
- Press
or
to select resolution and unite.
1= 0.1 mm
2= 0.01 mm
3= 0.01 IN
4= 0.001 IN
- Press
key to enter/confirm
