© PCE Instruments
6
5.
Press CAL key to set temperature value and press ENTER key to confirm. The tester
shows “YES/HOLD” indicating that the auto-hold function is enabled.
If the auto-hold function is enabled, the tester will automatically sense a stable endpoint
reading and freeze it. If you disable this function, the tester allows the user to freeze the
reading by pressing the HOLD key.
6.
Press CAL key to enable or disable the auto-hold function and press ENTER key to
confirm. The tester shows “YES/OFF” indicating that the auto-off function is enabled.
When the auto-off function is enabled, if you do not press any keys for 8 minutes, the tester will
automatically turn off to conserve energy.
7.
Press CAL key to enable or disable the auto-off function and press ENTER key to
confirm. The tester shows “NO/RST” indicating it will not reset the tester.
WARNING:
Reset function will restore the tester back to factory default settings, all calibration values and
selected parameters will be reset.
8.
Press CAL key to enable or disable the reset function. Press ENTER key to confirm, the
tester returns to measurement mode. Setting is completed.
EXIT THE SETUP MENU:
During the setup mode, press MEAS key, the tester will return to measurement mode
immediately.
Enter
Enter
Enter
