11
from behind the measuring range causes the setting of the overflow
and the beginning of the counting of correct measurements again.
The time is set by the manufacturer on 1 sec.
Table 1
Averaging time
0 5 s
1 s
3 s
5 s
10 s 15 s 20 s
Number of averaged
measurements
2
7
20
33
67
100
133
Updating of the value
on the display
0 5 s 0 5 s 0 5 s 0 5 s 0 5 s 0 5 s 0 5 s
Table 2
Averaging time
0 5s 1s 3s 5s 10s 15s 30s 1 m 2 m 5 m 7 m 12 m 15 m
Number of averaged
measurements
1
2
6
10 20 30 60 100 100 100 100 100 100
Updating of the va-
lue on the display
0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 0 5s 9 1s
In case of any error occurrence or exceeding of the range value, one of
the message described in the section 6 will be displayed.
5.3. Meter Configuration by Means of the
LPCon Program
The free delivered LPCon
program, available on the
page, is destined
for the
PCE-
N24 and
PCE-
N25 meter series configuration. The configuration
user’s manual for
PCE-
N24 and 25 meters by means of the
LPCon
program is also available on the
page.
The
PCE-
PD14 programmer is required for the configuration.
CAUTION!
The programming of meter parameters must be carried out
when measuring circuits are switched off
!
